Same-Day Delivery on Contractor Supplies
Contact Jason at jason@r-mcc.com or (507) 272-4239 for same-day delivery of contractor supplies in Rochester, MN, and throughout southeast Minnesota.
Ready Mix offers Contractor Supply at each of our five plants, helping you maintain an inventory of the most common concrete supplies you need for the work. Any concrete supplies you order can be delivered the same day to your job site. Save time and make your job easier with convenient Contractor Supply from Ready Mix Concrete Company. Contact Jason at (507) 272-4239.
Contractor concrete supplies include:
- Rebar / Bent rebar
- Gator bar
- Colored Concrete
- Stamped Concrete
- Concrete stains
- Various concrete tools
- Shake on Color Hardeners
- Concrete sealers
- Concrete finishers
- Nails
- Wall Forms and Ties
TK Products
Finishing Aids
TK 2120 TRI – Film
An evaporation retardant to be used on freshly poured concrete to retard the evaporation of surface water during times of placing concrete in direct sunlight, high winds, high temperatures, and/or low humidity. The evaporation retardant will prevent crusting of the surface of the concrete and aid in its finishing. TK-2120 TRI-FILM slows the evaporation by 80%.
TK- 2090 Liquid Stamp Release
A solution to be sprayed on the concrete before stamping that will help keep stamping and hand tools free from concrete buildup during use. It is scented with vanilla.
Cleaning and Thinning Solvents
TK – 00
A solvent for cleaning sprayers that were used for spraying a solvent-based curing and sealing compound and tools. It is also used for removing solvent-based curing and sealing compounds.
TK – 2012 KWIK – KLEAN
A biodegradable curing compound stripper and graffiti remover. Read label or Spec Data sheet before using.
Sealers
TK Achro Seal 1315
The common use for Achro Seal 1315 is as a curing and sealer compound that penetrates the slab, binding the small dust particles and filling the voids to produce a harder, dust-free, and brighter surface. The reasons to use this product are to provide maximum hardness and resistance to abrasion and damage caused by salt, oil, grease, mild acids and alkali, etc.
TK Tri_ Seal
A 100% water-based, high-solids, premiere acrylic resin compound formulated to cure, seal, protect, and dustproof concrete and many types of porous tile and resilient floor. TRI-SEAL is designed for both interior and exterior application; however, it is particularly recommended for indoor work in public buildings and housing (hospitals, schools, restaurants, and private residences where solvent systems are difficult to use).
TK Bright Kure & Seal
A blend of 100% methyl methacrylate polymers used as a superior, exposed aggregate cure, and final sealer and protective coating. Bright Seal is an excellent sealer for architectural concrete, terrazzo, brick, stone, slate, quarry tile, burnish block, or any cementitious material where yellowing or discoloration cannot be allowed. The coating is clear and does not yellow, nor degrade, with age or exposure to ultraviolet rays.
TK Tri Siloxane
A solvent-based, low viscosity oligomeric organosiloxane, one-component, deep-penetrating, invisible, non-darkening water repellent for concrete and masonry. The siloxane groups are chemically bonded, not just physically bonded like other surface penetrating sealers, to the concrete. It eliminates the ever-present moisture that had previously engulfed the cementitious substrate, thus eliminating spalling, freeze/thaw damage, and rebar corrosion. It penetrates up to 1/4 inch and becomes a permanent part of the substrate, not allowing water to enter, but allows moisture vapor to pass out of the substrate.
TK_290 WB
A water-based, low viscosity oligomeric organosiloxane, one-component, deep penetrating, invisible, non-darkening water repellent for concrete and masonry. The siloxane groups are chemically bonded, not just physically bonded like other surface penetrating sealers, to the concrete. It eliminates the ever-present moisture that had previously engulfed the cementitious substrate, thus eliminating spalling, freeze/thaw damage, and rebar corrosion. It penetrates up to 1/4 inch and becomes a permanent part of the substrate not allowing water to enter, but allows moisture vapor to pass out of the substrate.
Concrete Surface Retarders
TK-6000 Concrete Surface Retarder
Applied to the surface of freshly placed concrete, and it will chemically delay the set of the surface mortar. After 8 to 16 hours, the surface mortar can be washed off, exposing the surface aggregate.
Form Release Agents
TK- 709 OTC Ultra Release
A high-performance, low-odor form release agent that provides a means of easy release between all types of forms and concrete by the interaction of fatty acids, and with the use of a clear EPA-approved oil and other slippery agents instead of fuel oil, guarantees us non-staining of all architectural concrete. Rust inhibitors and wood preservatives are blended into the formulation to prevent rust on metal forms and deterioration of wooden forms.
Linseed Oil Based
TK-L368 Clear Emulsion Linseed Oil
A curing, sealing, and protective coating for fresh concrete surfaces. TK- L368 is formulated to meet state highway department requirements. TK-L368 meets ASTM C-309 Type I, Class B, and AASHTO M-148 Type 1, Class B.
TK-L368 WHITE
White pigment for exterior work.
Coverage Rate: Curing and Sealing 200 Sq. Ft./Gal.
Meets ASTM C-309 Type II, and AASHTO M-148 Type II.
Concrete Bonding Agents / Mixtures
TK-225 Bonding Agent
An acrylic latex liquid bonding agent and an admix (in place of water) for cement mortar patching and resurfacing. Mixed with a cement/sand or gravel combination, it becomes an effective patching and topping mortar having excellent adhesion capabilities and resistance to abrasion, freeze/thaw cycling, industrial chemicals, and deicing salts and chemicals.
TRI – Bond
A liquid, ready-to-use, high build, re-emulsifiable bonding agent used for adhering gypsum plaster and portland cement mixtures to all types of structurally sound surfaces (wallboard, fiberboard, wood, metal, glass, tile, concrete masonry, or marble) for bonding mortar bed of ceramic tile to old walls and floors. For bonding terrazzo and stucco.
Liquid Stamp Release
TK-2090 Liquid Stamp Release
A solution to be sprayed on the concrete before stamping, and it will also help keep stamping and hand tools free from concrete buildup during use. It is scented with vanilla.
Joint and Crack Fill
TK-9030 Crack and Joint Repair
A low viscosity translucent gray polyurethane/polyurea hybrid that comes in a 600 ML two component kit or bulk. It has a fast cure to allow for quick reopening of area. It has excellent adhesion and is very tough. Its low viscosity allows it to penetrate deep into smaller 1/32″ hairline cracks.
R. Meadows
MEADOW PATCH T1 (Thin Patch Repair Mortar)
A one-component, polymer-modified, cementitious repair mortar designed for horizontal, vertical, and overhead applications. This all-purpose mortar is designed for maintenance patching and minor repairs 1″ to featheredge.
MELROE – waterproofing system is a flexible, versatile, dependable, roll-type waterproofing membrane. It is composed of a nominally 56 mil thick layer of polymeric waterproofing membrane on a heavy-duty, four-mil thick, cross-laminated polyethylene carrier film. The two components are laminated together under strict quality-controlled production procedures.
Reinforcement Products
Rebar
Ready Mix-Contractor Supply is your one-stop supplier for your rebar needs. Common sizes in inventory are #2 (1/4″) pencil rod, #3 (3/8″), #4 (1/2″), #5 (5/8″), and #6 (3/4″). Call (507) 272-4239 or (507) 289-4022 for special orders. Prices on rebar change daily; call for pricing.
Wire Mesh
Rolls available: Size 5’X150′
Wire Mesh Mats 6″X6″X10’X10′
available: Size 8’X15′
Reinforcing Fiber
Fiber 150 – Poly Mesh (Monofilament) will control shrinkage and thermal cracking, will not rust or corrode, will assist in preventing cracks, will reduces permeability to chloride, will increase impact resistance, and is chemically inert and non-hazardous / non-reactive.
Fiber 300 – Poly Mesh (Fibrillated Fiber Reinforcement System for Concrete) will control shrinkage and thermal cracking, will not rust or corrode, will assist in preventing cracks, will reduce permeability to chloride, will increases impact resistance, and is chemically inert and non-hazardous / non-reactive.
In any application, from structural foundations to slabs, suspended structural concrete, and paving, Helix will increase the strength and durability of concrete.
